Sunday, 17 July 2011
bed and breakfast virginia
Stevenson Ridge is a Bed and Breakfast that offers premier and amazing venues for weddings and special events in the Spotsylvania, Fredericksburg, Northern Virginia and Richmond areas.
Friday, 8 July 2011
Swimming Pool Paint
260542 Zinsser Blue Swimming Pool Paint 5g
* Renew and protect your masonry swimming pool. Zinsser Swimming Pool Paint is the perfect solution for decorating and waterproofing interior or exterior concrete, gunite, masonry or plastered swimming pools, as well as other concrete and masonry surfaces, above and belowground.
* Not intended for use over chlorinated rubber, fiberglass, or two-part Epoxy-coated surfaces.
* Nationally compliant formula, Can be used on above or below ground concrete pools as well as plastered or other masonry surfaces. No primer or topcoat is necessary
* Coverage: 75-100 sq.ft./gal. (rough surfaces), 125-150 sq.ft./gal. (smooth surfaces)
* Dry and recoat times are based on 70�F and 50% relative humidity. Dries to touch in 4 to 6 hours. Apply a second coat after 24 hours to ensure sufficient time to dry. Allow the coating to cure for 72 hours under good conditions before filling the pool. CLEAN UP
* Apply only when air and surface temperatures are between 40- 90�F (5-32�C) and the surface temperature is at least 5�F (3�C) above the dew point.
* Use paint thinner, mineral spirits or turpentine for general cleanup.
* 5 gal
* Blue
* Weight: 56.00 lb.
* UPC: 047719272953
* Manufacturer Part No: 260542
* Renew and protect your masonry swimming pool. Zinsser Swimming Pool Paint is the perfect solution for decorating and waterproofing interior or exterior concrete, gunite, masonry or plastered swimming pools, as well as other concrete and masonry surfaces, above and belowground.
* Not intended for use over chlorinated rubber, fiberglass, or two-part Epoxy-coated surfaces.
* Nationally compliant formula, Can be used on above or below ground concrete pools as well as plastered or other masonry surfaces. No primer or topcoat is necessary
* Coverage: 75-100 sq.ft./gal. (rough surfaces), 125-150 sq.ft./gal. (smooth surfaces)
* Dry and recoat times are based on 70�F and 50% relative humidity. Dries to touch in 4 to 6 hours. Apply a second coat after 24 hours to ensure sufficient time to dry. Allow the coating to cure for 72 hours under good conditions before filling the pool. CLEAN UP
* Apply only when air and surface temperatures are between 40- 90�F (5-32�C) and the surface temperature is at least 5�F (3�C) above the dew point.
* Use paint thinner, mineral spirits or turpentine for general cleanup.
* 5 gal
* Blue
* Weight: 56.00 lb.
* UPC: 047719272953
* Manufacturer Part No: 260542
Gutter Guard
HC50001 RHINO DIY Gutter Guard 30ft.
* Fits 5" gutters
* The RHINO DIY GUTTER GUARD was designed to bring an affordable, easy to install and reliable gutter protection product to the "Do It Yourself" market that works with everyone's budget. A home's gutters were designed to collect and channel the water from the roof "away" from the home's walls, landscaping, and most importantly, the foundation.
* Unprotected gutters quickly collect debris and clog, causing the water to channel to all the wrong areas. When RHINO DIY is installed, the collection of debris in your gutters is eliminated, allowing them to work as intended.
* The RHINO DIY is a high quality product with strength and durability built into each and every piece. When installed properly, it will take the heaviest of rainfalls while preventing even the smallest of debris from ever entering the gutter system. The stainless steel mesh combined with a strong expanded aluminum body makes RHINO DIY the clear home improvement choice in gutter protection.
* We are so confident in our product, that we offer a 15-year, NO NONSENSE-NO CLOG guarantee! And best of all, it's 100% made in the USA!
* Average home installs in 3 to 4 hours (140') dependent on total number of inside and outside corners
* Material: Stainless Steel micro-mesh over expanded metal substrate
* Performance: Over 4.5" of rainfall per minute (that's over 260" of rain per hour)
* 30 feet
* Weight: 4.40 lb.
* UPC: 79357391235
* Manufacturer Part No: HC50001
* Fits 5" gutters
* The RHINO DIY GUTTER GUARD was designed to bring an affordable, easy to install and reliable gutter protection product to the "Do It Yourself" market that works with everyone's budget. A home's gutters were designed to collect and channel the water from the roof "away" from the home's walls, landscaping, and most importantly, the foundation.
* Unprotected gutters quickly collect debris and clog, causing the water to channel to all the wrong areas. When RHINO DIY is installed, the collection of debris in your gutters is eliminated, allowing them to work as intended.
* The RHINO DIY is a high quality product with strength and durability built into each and every piece. When installed properly, it will take the heaviest of rainfalls while preventing even the smallest of debris from ever entering the gutter system. The stainless steel mesh combined with a strong expanded aluminum body makes RHINO DIY the clear home improvement choice in gutter protection.
* We are so confident in our product, that we offer a 15-year, NO NONSENSE-NO CLOG guarantee! And best of all, it's 100% made in the USA!
* Average home installs in 3 to 4 hours (140') dependent on total number of inside and outside corners
* Material: Stainless Steel micro-mesh over expanded metal substrate
* Performance: Over 4.5" of rainfall per minute (that's over 260" of rain per hour)
* 30 feet
* Weight: 4.40 lb.
* UPC: 79357391235
* Manufacturer Part No: HC50001
Tuesday, 5 July 2011
multiply.com
Bk105 Door Chime
* Easy do-it-yourself instructions
* White molded cover with raised panels
* Frame is recessed
* 2 notes for front door
* 1 note for back door
* Transformer NOT included
* COLOR:White
* Weight: 1.00 lb.
* UPC: 784891030017
* Manufacturer Part No: BK105
* Easy do-it-yourself instructions
* White molded cover with raised panels
* Frame is recessed
* 2 notes for front door
* 1 note for back door
* Transformer NOT included
* COLOR:White
* Weight: 1.00 lb.
* UPC: 784891030017
* Manufacturer Part No: BK105
Standard Fluorescent Lamp Starter
Fs-2 Fluorescent Starter
* UL listed
* Guaranteed for 6000 starts
* SIZE:14,15,20
* Weight: 0.06 lb.
* UPC: 782547001022
* Manufacturer Part No: SPCFS-2
* UL listed
* Guaranteed for 6000 starts
* SIZE:14,15,20
* Weight: 0.06 lb.
* UPC: 782547001022
* Manufacturer Part No: SPCFS-2
Subscribe to:
Posts (Atom)